Contents x
Deploy Corezoid on VMware Fusion
  • 08 May 2024
  • 1 Minute to read
  • Contributors
  • Print
  • Dark
    Light
  • PDF
Contents

Deploy Corezoid on VMware Fusion

  • Updated on 08 May 2024
  • 1 Minute to read
  • Contributors
  • Print
  • Dark
    Light
  • PDF
Article summary

Requirements

VMware Fusion version (Activated)11 or later
CPU4 (minimum) - 6 (recommended)
RAM6GB (minimum) - 10GB (recommended)
HDDminimum 20GB free

Installation

Note: Before installing an image, make sure you have installed and activated a paid version of VMware Fusion. You won’t be able to deploy Corezoid on the Trial version of VMware Fusion.

  1. Click VMwareFusion and in the dropdown list, select Preferences.
    image.png

  2. In the Network dialog, click Network and add a new Network interface.
    image.png

    image.png

    If you have troubles with setting Subnet IP and Subnet Mask parameters, go to Troubleshooting.

  3. Create a new virtual machine: drag the .ovf file to the Select the Installation Method modal window.
    image.png

  4. Select the existing virtual machine and click Continue.
    image.png

  5. The installation starts.
    image.png

  6. Click Customize Settings.
    image.png

  7. In the menu, select Network Adapter.
    image.png

  8. Select your network interface.
    image.png

  9. Start up your virtual machine.
    image.png

  10. Finish the deployment.
    image.png

Launching

A few minutes later, after the successful launch of the system, you can open a Corezoid in your browser.

Web access: https://172.16.0.254/ (or your value)
Login: admin@corezoid.loc
Password: Middleware2020-

SSH access:
Login: support
Password: corezoid
Get superuser by command: sudo -i

Additional Information

After the image is installed, the IP address of the server is 172.16.0.254.
Note: You can change the IP address if needed: run a script which is located in /root/fix_domain_crz.sh.

SSH access:
Login: support
Password: corezoid
Get superuser by command: sudo -i

Monitoring and restarting

You can also monitor and restart applications via the monit:

  • Output of all the monitoring processes: sudo monit status

  • Disabling monitoring of monit applications:monit unmonitor all

  • Enabling the monitoring:monit monitor all

If monit is used to start / stop the application, then stop / start the application using the monit commands:

  • monit stop conveyor_api_multipart
  • monit start conveyor_api_multipart

Troubleshooting

When starting the virtual machine, the following error appears.

image.png

Perform the following actions in the system security settings:

  1. Go to the System Preferences tab, open the Security & Privacy, and click Allow.
    image.png

  2. If you get these errors when configuring the subnet, set the Subnet Mask to 255.255.255.0 and Subnet IP value to 172.16.0.0.
    image.png

  3. Change the Subnet Mask value to 255.255.255.192 and Subnet IP to 172.16.0.192.
    image.png

Was this article helpful?
What's Next